RSS Feed for This PostCurrent Article

Reverse Osmosis System 5-Stage & TFC Membrane

Now Only $199


Click Here To View Larger Image


  • Five-Stage Reverse Osmosis System & TFC Membrane
  • Made for all water types (well or chlorinated city water)
  • Ships Complete with all filters and membrane
  • For use with all GWG series filters and membranes

Added Information:

This reverse osmosis system utilizes five separate stages to treat your water down to ultimate purity. Using only the finest materials and craftsmanship, your GWG Series Reverse Osmosis System will provide your family with great-tasting purified water at your sink, or even at your refrigerator’s ice maker. The system is a great alternative to bottled water and it’s economical too – costing less than a few pennies per gallon!

Everyday Uses:

  • Great for drinking & cooking!
  • Make great-tasting coffee, tea and juices!
  • Connect your system to your ice maker for pure, crystal clear ice cubes
  • Use for steam irons, fresh flowers, humidifiers

Stage Description:

  • 1: Pre filter – NSF 5 Micron Spun Polypropylene (sediment reduction)
  • 2: Post Filter #1 – NSF 0.5 Micron Carbon Block (taste, odor, and chlorine reduction)
  • 3: Post Filter #2- NSF 0.5 Micron Carbon Block (taste, odor, and chlorine reduction)
  • 4: Alpspring TFC Membrane – NSF Thin Film Composite (removes salts & bacteria)
  • 5: Polishing Filter – Inline Granular Activated Carbon (taste and odor reduction)

Included Accessories:

  • Complete 5-Stage Reverse Osmosis System -all filters and membrane included
  • NSF Steel Storage Tank – 3.2 Gal Capacity
  • Reservoir Tank Shut-Off Valve
  • NSF Jayco Style Compression Fittings (No Leaks – Unlike quick disconnect fittings)
  • NSF Chrome Long-Reach Faucet and 3/8″ Tubing Adapter
  • Self-Piercing Inlet Saddle Valve Assembly
  • Drain Saddle Clamp Assembly
  • Filter Change Spanner Wrench
  • System Shut-Off Valve (will automatically shut down system when tank is full)
  • Complete Installation Guide

Recommended Operating Conditions:

  • Inlet Pressure:   25 PSI – 70 PSI
  • Inlet TDS:   0 PPM – 1000 PPM
  • Water Temperature:   34°F – 85°F
  • Hardness:   < 10 GPG
  • Iron:   < 1 PPM
  • Filter Change:   9-12 Months
  • Membrane Change:   2-5 Years as Needed
  • Polishing Filter Change:   12-18 Months

NOTE: Water conditions outside of the above specified limits may lead to a shortened filter and membrane life.

WARNING: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the unit

CAUTION: System must be protected from freezing. Failure to do so may result in cracking of the filter housing and/or water leakage

NOTE: The membrane element is treated with a chemical preservative. After installation, the system should be flushed with sufficient water  before use.

Shipping Weight: Approx. 25 lbs.

Comments (0)

Trackback URL | Comments RSS Feed

There are no comments yet. Why not be the first to speak your mind.

Post a Comment

If you want a picture to show with your comment, go get a Gravatar.